SPACERS FOR WOODEN FORMWORK

Our spacers are made of laminated steel with rounded and non sharp edges and provide a tensile strength of 70 kg./mm Sq.
They are available in packs of 100 pieces packed and sealed in high resistant polyethylene bags (possibility of having carton boxes).
On request we produce plastic cap spacers, twisted spacers and corner spacer.

Instructions:
• in the same casting use spacers and stirrups from the same manufacturer;
• check carefully the proper coupling of wedges and stirrups;
• do not use different equipment in the same casting (eg stirrups with "U" profiles, or small wedges with large wedges);
• according to the casting you have to ensure that an adequate numbers of spacers are used;
• the casting has to be slow, do not flow the concrete fast especially at the base of the formwork (the maximum speed of vertical filling is 2.50 meters/hour).

 
Delta Valle srl

Continue